Disconnecting the Battery

Note: You may need the radio code to reset your radio after disconnecting your battery. This is only applicable to OEM radios.

Raising the hood

1. Pull the hood release latch located in the area of the driver’s footwell. The hood

will unlock, and pop up slightly.

2. Unlatch and release the hood by pulling up on the hood, then pulling out on the

small black tab under the hood and then pulling up on the hood.

Removing the positive terminal

3. Remove the battery cover by lifting up on the front and pulling it straight out.

4. Loosen the battery clamp on the passenger’s side of the battery with a 10 mm socket. This is the red, positive terminal cable. You do not need to remove the nut, just loosen it enough to slide the terminal off of the battery.